A Proposed Design for the Refrigeration Laboratory for the Greater Armour Institute of Technology
The book A Proposed Design for the Refrigeration Laboratory for the Greater Armour Institute of Technology was written by author Hoven, Alfred C Here you can read free online of A Proposed Design for the Refrigeration Laboratory for the Greater Armour Institute of Technology book, rate and share your impressions in comments. If you don't know what to write, just answer the question: Why is A Proposed Design for the Refrigeration Laboratory for the Greater Armour Institute of Technology a good or bad book?
What reading level is A Proposed Design for the Refrigeration Laboratory for the Greater Armour Institute of Technology book?
To quickly assess the difficulty of the text, read a short excerpt:
All joints shall be made tight. The upper surface shall be flooded v/oth hot asphalt, approximately l/S inch thick. T.& G-. flooring shall then be securely nailed dovm to the sleepers. Selected maple shall be used for the flooring. ?ARTITI01TS The insulation on partitions shall be ei-ect- ed according to the specifics.tions laid dovni foz" 14 the v/alls except, that two courser, of tv.-o-inch ITonparell corhboard shell be placed on each side of the partition proper. PIPING The ammonia coils in ...the direct expansion rooms and the brine colls in the indirect expan- sion rooms shall be placed on each thirty foot v^all, close up to ceilin/j;. Each coil shall be tv/o pipes v/ide and ten pipes high, with four inches between pipe centers. All pipes used shall be Byers ' 2-inch Virrought iron pipe. The piping specified above is sufficient to remove 3'^,'^-^^'^ B.T.U. per hour with a ten degree difference in temperature betv/een the room and the brine or ammonia. 2.5 v/as used as the coef- ficient of hect transmission.
You can download books for free in various formats, such as epub, pdf, azw, mobi, txt and others on book networks site. Additionally, the entire text is available for online reading through our e-reader. Our site is not responsible for the performance of third-party products (sites).
User Reviews: