Electric Gas Lighting; How to Install Electric Gas Igniting Apparatus, Including the Jump Spark And Multiple Systems, for Use in Houses, Churches, Theatres, Halls, Schools, Stores Or Any Large Buildings, Also the Care And Selection of Suitable Batteries,
Electric Gas Lighting; How to Install Electric Gas Igniting Apparatus, Including the Jump Spark And Multiple Systems, for Use in Houses, Churches, Theatres, Halls, Schools, Stores Or Any Large Buildings, Also the Care And Selection of Suitable Batteries,
Norman H Norman Hugh Schneider
The book Electric Gas Lighting; How to Install Electric Gas Igniting Apparatus, Including the Jump Spark And Multiple Systems, for Use in Houses, Churches, Theatres, Halls, Schools, Stores Or Any Large Buildings, Also the Care And Selection of Suitable Batteries, was written by author Norman H Norman Hugh Schneider Here you can read free online of Electric Gas Lighting; How to Install Electric Gas Igniting Apparatus, Including the Jump Spark And Multiple Systems, for Use in Houses, Churches, Theatres, Halls, Schools, Stores Or Any Large Buildings, Also the Care And Selection of Suitable Batteries, book, rate and share your impressions in comments. If you don't know what to write, just answer the question: Why is Electric Gas Lighting; How to Install Electric Gas Igniting Apparatus, Including the Jump Spark And Multiple Systems, for Use in Houses, Churches, Theatres, Halls, Schools, Stores Or Any Large Buildings, Also the Care And Selection of Suitable Batteries, a good or bad book?
What reading level is Electric Gas Lighting; How to Install Electric Gas Igniting Apparatus, Including the Jump Spark And Multiple Systems, for Use in Houses, Churches, Theatres, Halls, Schools, Stores Or Any Large Buildings, Also the Care And Selection of Suitable Batteries, book?
To quickly assess the difficulty of the text, read a short excerpt:
Primary Winding. This consists of two layers of No. 14 B. & S. Digitized by LjOOQ IC Lighting of Large Buildings *]t gauge cotton (or silk) covered copper magnet wire, and should be evenly and tightly laid on. For winding coils, a lathe is a most handy machine, or the spool can be mounted on a spindle and rotated by hand. It is not feasible here to give all details of coil-con- struction; reference should be made to the many excellent works on the subject. The two ends are brought out through h...oles in the spool ends, as indicated for the simple primary coil before described. After winding, the wire is to be well basted with melted paraffin wax until it is saturated, any excess being scraped off so as to leave a smooth cylindrical surface for the secondary coil. Half a dozen turns of stout paper or oiled silk is now to be wound on, and enough paraffin wax added to leave an insulation at least one-quarter of an inch around the outside of the winding. The right-hand end of spool, where the end was not attached, will require a little care that the wire does not run off; but, as only two layers are to be wound, it is an easy thing to do.
What to read after Electric Gas Lighting; How to Install Electric Gas Igniting Apparatus, Including the Jump Spark And Multiple Systems, for Use in Houses, Churches, Theatres, Halls, Schools, Stores Or Any Large Buildings, Also the Care And Selection of Suitable Batteries,? You can find similar books in the "Read Also" column, or choose other free books by Norman H Norman Hugh Schneider to read onlineMoreLessRead More Read Less
Read book Electric Gas Lighting; How to Install Electric Gas Igniting Apparatus, Including the Jump Spark And Multiple Systems, for Use in Houses, Churches, Theatres, Halls, Schools, Stores Or Any Large Buildings, Also the Care And Selection of Suitable Batteries, for free
Claim the "Electric gas lighting; how to install electric gas igniting apparatus, including the jump spark and multiple systems, for use in houses, churches, the.txt"
User Reviews: