Emery And the Emery Industry a Technical Study of Modern Abrasives And the Deve
Emery And the Emery Industry a Technical Study of Modern Abrasives And the Deve
The book Emery And the Emery Industry a Technical Study of Modern Abrasives And the Deve was written by author Here you can read free online of Emery And the Emery Industry a Technical Study of Modern Abrasives And the Deve book, rate and share your impressions in comments. If you don't know what to write, just answer the question: Why is Emery And the Emery Industry a Technical Study of Modern Abrasives And the Deve a good or bad book?
Where can I read Emery And the Emery Industry a Technical Study of Modern Abrasives And the Deve for free?
In our eReader you can find the full English version of the book. Read Emery And the Emery Industry a Technical Study of Modern Abrasives And the Deve Online - link to read the book on full screen. Our eReader also allows you to upload and read Pdf, Txt, ePub and fb2 books. In the Mini eReder on the page below you can quickly view all pages of the book - Read Book Emery And the Emery Industry a Technical Study of Modern Abrasives And the Deve
In our eReader you can find the full English version of the book. Read Emery And the Emery Industry a Technical Study of Modern Abrasives And the Deve Online - link to read the book on full screen. Our eReader also allows you to upload and read Pdf, Txt, ePub and fb2 books. In the Mini eReder on the page below you can quickly view all pages of the book - Read Book Emery And the Emery Industry a Technical Study of Modern Abrasives And the Deve
What reading level is Emery And the Emery Industry a Technical Study of Modern Abrasives And the Deve book?
To quickly assess the difficulty of the text, read a short excerpt:
, and are particularly valuable in all shops where the turners or planers have to sharpen and set their own tools.
These machines are very strongly built, the shaft being of best steel and ground true to fit the bearings, which are of red brass, fitted with ring lubricators and bolted on to the top of the frame. It being very important that the hardness of the ground tools should not be impaired, dry grinding is out of the question, and all these machines are, therefore, fitted with water-feed.... In the newest patterns the top of the frame is dished to form a water-trough, the water being fed automatically by a centrifugal pump from the water-tank inside the hollow frame. The dirty water drains back into the tank, and after depositing the contained solid matter is used over again. For small shops machines of this type are also sup- plied with a support or with a wall-bracket, the water being supplied by means of a dropper mounted above the machine.
GEINDING MACHINES 79 This is the primitive form, corresponding to the method used with ordinary grindstones.
What to read after Emery And the Emery Industry a Technical Study of Modern Abrasives And the Deve?
You can find similar books in the "Read Also" column, or choose other free books by Alfred Haenig to read onlineMoreLess
To quickly assess the difficulty of the text, read a short excerpt:
, and are particularly valuable in all shops where the turners or planers have to sharpen and set their own tools.
These machines are very strongly built, the shaft being of best steel and ground true to fit the bearings, which are of red brass, fitted with ring lubricators and bolted on to the top of the frame. It being very important that the hardness of the ground tools should not be impaired, dry grinding is out of the question, and all these machines are, therefore, fitted with water-feed.... In the newest patterns the top of the frame is dished to form a water-trough, the water being fed automatically by a centrifugal pump from the water-tank inside the hollow frame. The dirty water drains back into the tank, and after depositing the contained solid matter is used over again. For small shops machines of this type are also sup- plied with a support or with a wall-bracket, the water being supplied by means of a dropper mounted above the machine.
GEINDING MACHINES 79 This is the primitive form, corresponding to the method used with ordinary grindstones.
What to read after Emery And the Emery Industry a Technical Study of Modern Abrasives And the Deve?
You can find similar books in the "Read Also" column, or choose other free books by Alfred Haenig to read onlineMoreLess
Read book Emery And the Emery Industry a Technical Study of Modern Abrasives And the Deve for free
Write Review:
Guest
Read Also
9 / 10
User Reviews: