Fly Rods And Fly Tackle Suggestions As to Their Manufacture And Use
The book Fly Rods And Fly Tackle Suggestions As to Their Manufacture And Use was written by author Henry P Henry Parkhurst Wells Here you can read free online of Fly Rods And Fly Tackle Suggestions As to Their Manufacture And Use book, rate and share your impressions in comments. If you don't know what to write, just answer the question: Why is Fly Rods And Fly Tackle Suggestions As to Their Manufacture And Use a good or bad book?
What reading level is Fly Rods And Fly Tackle Suggestions As to Their Manufacture And Use book?
To quickly assess the difficulty of the text, read a short excerpt:
This the thinness of the point of the keeper will enable you easily to do. Then Fig. 49. 4, joint ;, winding ; C, keeper. wind it on tightly nearly to its middle, with care that each turn of the silk lies close to, and by no means overlaps, its neighbor. Then holding the turns already made in place with the left thumb, bend the uncovered end of the keeper upward, thus: C D Pig. 60. A, joint; B, winding; C, keeper; D, ring. and wind where the ring is to be placed. Having covered this (about one-...eighth of an inch, a little more or less according to the size of the ring), drop on the ring, holding it with the left thumb in the position shown at Rod-making. 263 D in the preceding figure. Then bend the free end of the keeper down on to the joint, and with the back of a scissors or knife apply a sharp pressure close to the ring, and this will be the result: Pig. 51. A, joint ; B, winding ; C, keeper ; D, ring. Then finish the winding, and fasten it off. Next, with the handle of an old tooth-brush, or other similar hard and smooth substance, polish the winding all over.
You can download books for free in various formats, such as epub, pdf, azw, mobi, txt and others on book networks site. Additionally, the entire text is available for online reading through our e-reader. Our site is not responsible for the performance of third-party products (sites).
User Reviews: