Gas And Fuel Analysis for Engineers a Compend for Those Interested in the Econ
Gas And Fuel Analysis for Engineers a Compend for Those Interested in the Econ
Augustus H Augustus Herman Gill
The book Gas And Fuel Analysis for Engineers a Compend for Those Interested in the Econ was written by author Augustus H Augustus Herman Gill Here you can read free online of Gas And Fuel Analysis for Engineers a Compend for Those Interested in the Econ book, rate and share your impressions in comments. If you don't know what to write, just answer the question: Why is Gas And Fuel Analysis for Engineers a Compend for Those Interested in the Econ a good or bad book?
What reading level is Gas And Fuel Analysis for Engineers a Compend for Those Interested in the Econ book?
To quickly assess the difficulty of the text, read a short excerpt:
Extreme care should be taken that no oil or grease is deposited on the lead gasket, as the bomb, when working properly, closes without the upper half turning on the gasket on account of the contact friction of the nut. Any oil on the lead gasket would tend to hinder the proper action in this respect. The large wrench is used to make the joint tight, and operator should apply the same very nearly to his full strength. (If the thread of the large nut is kept free from dirt, it will turn into plac...e freely by hand. ) The bomb is now ready to be filled with oxygen, and this is accomplished by means of the spindle valve at the top of the bomb. The nipple is coupled to the oxygen piping by means of the attached hand union, the bomb resting on the swivel table. (The oxygen piping should be properly located and screwed fast to the bench. ) The 88 GAS AND FUEL ANALYSIS. Screw holes in the feet of the sv/ivel table are left large and are made for round-head screws so as to allow for adjust- ment relative to the oxygen piping.
User Reviews: