The Manufacture of Iron And Steel a Handbook for Engineering Students Merchan
The Manufacture of Iron And Steel a Handbook for Engineering Students Merchan
The book The Manufacture of Iron And Steel a Handbook for Engineering Students Merchan was written by author Here you can read free online of The Manufacture of Iron And Steel a Handbook for Engineering Students Merchan book, rate and share your impressions in comments. If you don't know what to write, just answer the question: Why is The Manufacture of Iron And Steel a Handbook for Engineering Students Merchan a good or bad book?
Where can I read The Manufacture of Iron And Steel a Handbook for Engineering Students Merchan for free?
In our eReader you can find the full English version of the book. Read The Manufacture of Iron And Steel a Handbook for Engineering Students Merchan Online - link to read the book on full screen. Our eReader also allows you to upload and read Pdf, Txt, ePub and fb2 books. In the Mini eReder on the page below you can quickly view all pages of the book - Read Book The Manufacture of Iron And Steel a Handbook for Engineering Students Merchan
In our eReader you can find the full English version of the book. Read The Manufacture of Iron And Steel a Handbook for Engineering Students Merchan Online - link to read the book on full screen. Our eReader also allows you to upload and read Pdf, Txt, ePub and fb2 books. In the Mini eReder on the page below you can quickly view all pages of the book - Read Book The Manufacture of Iron And Steel a Handbook for Engineering Students Merchan
What reading level is The Manufacture of Iron And Steel a Handbook for Engineering Students Merchan book?
To quickly assess the difficulty of the text, read a short excerpt:
In this case more THE BASIC OPEN-HEARTH PROCESS 55 lime is added, and some hot pig iron is charged in order to again get the metal " on the boil. " Samples are taken from the furnace at intervals, and when they are cooled and broken it can be seen by the appearance of the fracture to what extent the phos- phorus has been eliminated.
At the end of the process the slag should be as non- oxidising as possible, as, if too much oxygen is present, the metal cannot be quietly teemed.
The elimination o...f much sulphur cannot be relied upon, and for this reason a pig iron with a small per- centage of sulphur should be selected.
Manganese, during the process, has some slight effect in eliminating sulphur, and when the spiegeleisen or ferro-manganese is added, there is a further small reduc- tion of sulphur.
To convert the iron into steel, spiegel or ferro is added as in the Siemens acid process.
It is not intended that the basic material with which the furnace is lined shall be used as a base to absorb the acids, silica and phosphoric acid lime is added to prevent that; but the lining becomes gradually worn and damaged, and new layers of basic material are occasionally required.
What to read after The Manufacture of Iron And Steel a Handbook for Engineering Students Merchan?
You can find similar books in the "Read Also" column, or choose other free books by H R Hearson to read onlineMoreLess
To quickly assess the difficulty of the text, read a short excerpt:
In this case more THE BASIC OPEN-HEARTH PROCESS 55 lime is added, and some hot pig iron is charged in order to again get the metal " on the boil. " Samples are taken from the furnace at intervals, and when they are cooled and broken it can be seen by the appearance of the fracture to what extent the phos- phorus has been eliminated.
At the end of the process the slag should be as non- oxidising as possible, as, if too much oxygen is present, the metal cannot be quietly teemed.
The elimination o...f much sulphur cannot be relied upon, and for this reason a pig iron with a small per- centage of sulphur should be selected.
Manganese, during the process, has some slight effect in eliminating sulphur, and when the spiegeleisen or ferro-manganese is added, there is a further small reduc- tion of sulphur.
To convert the iron into steel, spiegel or ferro is added as in the Siemens acid process.
It is not intended that the basic material with which the furnace is lined shall be used as a base to absorb the acids, silica and phosphoric acid lime is added to prevent that; but the lining becomes gradually worn and damaged, and new layers of basic material are occasionally required.
What to read after The Manufacture of Iron And Steel a Handbook for Engineering Students Merchan?
You can find similar books in the "Read Also" column, or choose other free books by H R Hearson to read onlineMoreLess
Read book The Manufacture of Iron And Steel a Handbook for Engineering Students Merchan for free
You can download books for free in various formats, such as epub, pdf, azw, mobi, txt and others on book networks site. Additionally, the entire text is available for online reading through our e-reader. Our site is not responsible for the performance of third-party products (sites).
Write Review:
Guest
Read Also
8 / 10
9 / 10
User Reviews: